1 1/4 Sucker Rod Connect Rotor and Stator Screw Pump Well Pump

Structure: Combined
Trademark: Baofeng Brand
Transport Package: Export Package
Specification: API
Origin: Weifang China
Structure: Combined
Trademark: Baofeng Brand
Transport Package: Export Package
Specification: API
Origin: Weifang China
Sucker rod is important part of rod production equipment which drives the downhole pump from the motor of the pumping units,and manufactured according to API Spec 11B soecufucautions.

Progressive Cavity Pump System Brief Introduction
Screw pupmp system consists of Surface Drive Device, Downhole screw pump, Electrical Control Panel and Matching Tools.
Screw pump has been widely used in oil fields at home and abroad and plays an important role in oil production. There is a trend to replace the large heavy pumping units in shallow well and middle-deep well.
PC Pump Setting Parameters
Setting depth(m) 500 600 700 800 900 1000 1100 1200
Lifting distance (mm) 550 650 750 850 950 1100 1200 1300

GLB series of PC Pump Parameters

Model		 Length
(mm)
Maxi. Diameter
(mm)
Rotor screw
(in)
Stator upper screw(in)
Stator lower screw(in)
Rod rate (rpm)
Theoretical dairy flow(m3/d)
Applicable tubing(in)
Sucker rod(in)		 Head(m)
GLB\10/35 2940 90 15/16″ 2-7/8″ 2-7/8″ 60-150 1-4 ≥73 7/8″ 1000-1400           
GLB\28/40 3650 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 3-6 ≥73 7/8″ 1200-1600
GLB\40/12 1550 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 600-800
GLB\40/14 2200 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 400-600
GLB\40/21 2330 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 700-1000
GLB\40/42 4670 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 1200-1800
GLB\50/21 2380 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 5-10 ≥73 7/8″ 700-1000
GLB\75/14 2140 90 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 7/8″ 400-600
GLB\75/21 2200 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 700-1000
GLB\75/40 4410 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 1200-1600
LB\120/18 3000 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 500-800
GLB\120/21 2932 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 700-1000
GLB\120/27 4428 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 800-1000
GLB\120/36 5865 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1100-1400
GLB\120/40 5900 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1200-1600
GLB\165/35 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 14-36 ≥73 1″ 900-1300
GLB\190/33 5650 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 15-40 ≥73 1″ 900-1300
GLB\200/27 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 17-42 ≥73 1″ 800-1000
GLB\300/21 4850 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥73 1″ 700-1000
GLB\300/26 6000 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 700-1000
GLB\300/33 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 800-1200
GLB\420/20 4820 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 35-70 ≥88.9 1″ 700-1000
GLB\500/14 3380 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 600-800
GLB\500/21 5060 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 700-1000
GLB\600/18 7122 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 85-130 ≥88.9 1″ 500-900
GLB\230/2-30 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 20-50 ≥88.9 1″ 900-1200
GLB\450/2-24 6520 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 39-97 ≥88.9 1″ 700-1000
GLB\800/2-16 5020 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 500-700
GLB\800/2-24 7120 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 700-900
GLB\1200/2-16 6640 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 103-260 ≥88.9 KG36″ 600-800
GLB\1400/2-16 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 120-302 ≥88.9 KG36″ 600-800
GLB\1600/2-14 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 138-345 ≥88.9 KG36″ 500-700
GLB\1800/2-14 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 155-388 ≥88.9 KG36″ 500-700
GLB\2500/2-8 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 216-540 ≥88.9 KG36″ 400-600
GLB\3000/2-8 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 260-648 ≥88.9 KG36″ 400-600
GLB\4000/2-6 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 430-1080 ≥88.9 KG36″ 400-600
GLB\75-47/K 5465 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥88.9 1″ 1400-1800
GLB\120-40/K 5900 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥88.9 1″ 1200-1600
GLB\165-35/K 5650 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 14-36 ≥88.9 1″ 1100-1400
GLB\300-21/K 4850 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥73 1″ 700-1000
GLB\40-21/GW 2330 90 1-3/8″ 3-1/2″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 700-1000
GLB\75-21/GW 2200 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 7/8″ 700-1000
GLB\120-21/GW 2932 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 7/8″ 700-1000
 
Applicable Oil Condition
The screw pump can be used for low viscosity crude oil, also for heavy oil, high freezing point oil, high wax oil, high sand oil and high gas oil. It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance.

Advantages:
It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance.

Sucker Rod Technical Parameters:
Nominal Size
   (in)		 Rod Body OD
    (mm)		 Pin Should OD
    (mm)		 Nominal Thread Dia.
  (mm)		 Sucker Rod
 Length
 (mm)		 Pony Rod Length
     (mm)
5/8 15.88 31.8 15/16  
  7518;
  9042		 508 
3/4 19.05 38.1 1 1/16 1118
7/8 22.23 41.3 1 3/16 1727
1 25.40 50.8 1 3/8  2337
1 1/8 28.58 57.2 1 9/16 2946

Contact Information:
Tel: +86 132 8767 7228
Web:www.bf-pump-equipment.com; www.wfbaofeng.com
Shanghai company web: www.shdfsy.com
 
 
  Sucker rod is important part of rod production equipment which drives the downhole pump from the motor of the pumping units,and manufactured according to API Spec 11B soecufucautions.

Progressive Cavity Pump System Brief Introduction
Screw pupmp system consists of Surface Drive Device, Downhole screw pump, Electrical Control Panel and Matching Tools.
Screw pump has been widely used in oil fields at home and abroad and plays an important role in oil production. There is a trend to replace the large heavy pumping units in shallow well and middle-deep well.
PC Pump Setting Parameters
Setting depth(m) 500 600 700 800 900 1000 1100 1200
Lifting distance (mm) 550 650 750 850 950 1100 1200 1300

GLB series of PC Pump Parameters

Model		 Length
(mm)
Maxi. Diameter
(mm)
Rotor screw
(in)
Stator upper screw(in)
Stator lower screw(in)
Rod rate (rpm)
Theoretical dairy flow(m3/d)
Applicable tubing(in)
Sucker rod(in)		 Head(m)
GLB\10/35 2940 90 15/16″ 2-7/8″ 2-7/8″ 60-150 1-4 ≥73 7/8″ 1000-1400           
GLB\28/40 3650 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 3-6 ≥73 7/8″ 1200-1600
GLB\40/12 1550 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 600-800
GLB\40/14 2200 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 400-600
GLB\40/21 2330 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 700-1000
GLB\40/42 4670 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 1200-1800
GLB\50/21 2380 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 5-10 ≥73 7/8″ 700-1000
GLB\75/14 2140 90 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 7/8″ 400-600
GLB\75/21 2200 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 700-1000
GLB\75/40 4410 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 1200-1600
LB\120/18 3000 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 500-800
GLB\120/21 2932 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 700-1000
GLB\120/27 4428 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 800-1000
GLB\120/36 5865 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1100-1400
GLB\120/40 5900 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1200-1600
GLB\165/35 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 14-36 ≥73 1″ 900-1300
GLB\190/33 5650 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 15-40 ≥73 1″ 900-1300
GLB\200/27 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 17-42 ≥73 1″ 800-1000
GLB\300/21 4850 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥73 1″ 700-1000
GLB\300/26 6000 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 700-1000
GLB\300/33 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 800-1200
GLB\420/20 4820 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 35-70 ≥88.9 1″ 700-1000
GLB\500/14 3380 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 600-800
GLB\500/21 5060 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 700-1000
GLB\600/18 7122 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 85-130 ≥88.9 1″ 500-900
GLB\230/2-30 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 20-50 ≥88.9 1″ 900-1200
GLB\450/2-24 6520 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 39-97 ≥88.9 1″ 700-1000
GLB\800/2-16 5020 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 500-700
GLB\800/2-24 7120 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 700-900
GLB\1200/2-16 6640 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 103-260 ≥88.9 KG36″ 600-800
GLB\1400/2-16 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 120-302 ≥88.9 KG36″ 600-800
GLB\1600/2-14 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 138-345 ≥88.9 KG36″ 500-700
GLB\1800/2-14 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 155-388 ≥88.9 KG36″ 500-700
GLB\2500/2-8 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 216-540 ≥88.9 KG36″ 400-600
GLB\3000/2-8 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 260-648 ≥88.9 KG36″ 400-600
GLB\4000/2-6 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 430-1080 ≥88.9 KG36″ 400-600
GLB\75-47/K 5465 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥88.9 1″ 1400-1800
GLB\120-40/K 5900 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥88.9 1″ 1200-1600
GLB\165-35/K 5650 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 14-36 ≥88.9 1″ 1100-1400
GLB\300-21/K 4850 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥73 1″ 700-1000
GLB\40-21/GW 2330 90 1-3/8″ 3-1/2″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 700-1000
GLB\75-21/GW 2200 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 7/8″ 700-1000
GLB\120-21/GW 2932 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 7/8″ 700-1000
 
Applicable Oil Condition
The screw pump can be used for low viscosity crude oil, also for heavy oil, high freezing point oil, high wax oil, high sand oil and high gas oil. It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance.

Advantages:
It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance.

Sucker Rod Technical Parameters:
Nominal Size
   (in)		 Rod Body OD
    (mm)		 Pin Should OD
    (mm)		 Nominal Thread Dia.
  (mm)		 Sucker Rod
 Length
 (mm)		 Pony Rod Length
     (mm)
5/8 15.88 31.8 15/16  
  7518;
  9042		 508 
3/4 19.05 38.1 1 1/16 1118
7/8 22.23 41.3 1 3/16 1727
1 25.40 50.8 1 3/8  2337
1 1/8 28.58 57.2 1 9/16 2946

Contact Information:
Tel: +86 132 8767 7228
Web:www.bf-pump-equipment.com; www.wfbaofeng.com
Shanghai company web: www.shdfsy.com
 
 
 

Flux Cored Welding Wire Production Line

straight line wire drawing machine

no1, wire drawing machine usage: for the production of high carbon steel wire (steel cord, bead wire, spring wire, wire rope, etc.), stainless steel wire, low carbon steel wire (welding wire, galvanized steel wire, packing wire, nail making wire) , copper (alloy) wire, aluminum (alloy) wire
no2, wire drawing machine features: no reducer, no v-belt, no variable frequency motor; no electricity cabinet
working characteristics: 15% power saving, no accessories, low noisy at any speed ≤ 50db
no3, transportation and installation: designed into triple or quadruple or five-group according to need, it is convenient for transportation. only the aviation plug and quick plug can be connected to realize the whole unit connection of water, electricity and gas. the machine can be installed only by the expansion bolts fixed on the ground; the two machines are installed back to back seamlessly, saving 50% of the site, and the installation of each wire drawing machine is completed within 4 hours.
no4, transmission lubrication: wire drawing machine servo motor self-lubricating, 15 years no oiling
no5, matching: any mode, no need to adjust the electronic control parameters, free jump mode drawing
no6, production: high carbon steel wire, stainless steel wire, low carbon steel wire can be produced freely on the same machine
no7, cooling: the outer edge of the reel covers (servo motor) water tray, no dust and garbage enters the pipeline, cooling system
open, narrow slit water cooling, no fouling, no clogging, maintenance free
no8, speed: speed adjustment, stepless speed change, heavy load low speed, light load high speed, 0~300hz free
frequency operation efficiency is maintained above 95%
no9, servo motor: from China high speed rail group, with more than 10 years of experience of servo motor operation
inspection, ensure that each motor is rigorously tested by the national laboratory, and has a certificate of conformity and test data. the motor is water-cooled (the supplier provides the circulating water tank and condensing equipment at random) and the water temperature online detection and alarm system.
no10, the price: compared with the ordinary wire drawing machine, the price is 30% higher, and the saved electricity cost is recovered in two years.

Flux Cored Welding Wire Production Line,Flux Cored Wire Drawing Machine,Seamless Flux Cored Wire Production Line,Seamless Flux Cored Wire Product Line

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com