Model NO.: 26x1 3/4
Use: BMX,Cruisers,Kids′ Bikes,Mountain Bikes,Road Bicyc
Size: 26inches
Trademark: kingworld
Origin: Qingdao
Endure longer in hot area;Excellent Airproof;
Much lighter bicycle tire made of butyl;
Special design for keeping shape
Due to our low-labor cost and unique design, our bicycle tire can have an excellent cost performance.
We are close to the raw material base give us an edge to compete with other suppliers.
We use multi-strand steel wire inside to keep the tire shape.
1. Full range of size and patterns avaliable, satisfy different countries and market.
2. Excellent wear-resistance and service life, the tyre can run more than 20000 kilometers
3. Different quality level to satisfy different customers. 35%, 45%, 55% rubber percent
4. Advanced rubber formula, technology and mould imported from Taiwan.
5. Standard exported packing is beautiful and popular
6. Deep pattern have good traction
7. Factory supply have the competitive price.
8. Best after service to hold our customer
9. Prompt delivery time to satisfy the customers market need.
10. Free sample will be offered to test our quality
11. ISO9001: 2000, CCC. ECE, CIQ, DOT, E-MARK, INMETRO, SNI, SONCAP
| tyre size | inner tube size | |||
| 24x1 3/8 | 26x1.75 | 28X1-1/2 | 26X2.125 | 28X1.75 |
| 26x1 3/8 | 16x1.95/2.125 | 26X1-3/8 | 24X2.125 | 27X1-1/4 |
| 24x1.50 | 20x1.95/2.125 | 24X1-3/8 | 22X2.125 | 27X1-3/8 |
| 26x1.50 | 24x1.95/2.125 | 26X1.75/2.125 | 20X2.125 | 28X1-5/8X1-3/8Â Â (700X35C) |
| 12x1.75 | 26x1.95/2.125 | 24X1.75/2.125 | 18X2.125 | 700X23C |
| 14x1.75 | 20x2.35/2.50 | 22X1.75/2.125 | 16X2.125 | 26X1-1/2X1-5/8 |
| 16x1.75 | 24x2.35/2.50 | 20X1.75/2.125 | 12X2.125 | 24X1.50 |
| 18x1.75 | 26x2.35/2.50 | 18X1.75/2.125 | 26X2X1-3/4 | 26X1.50 |
| 20x1.75 | 28x1 1/2 | 16X1.75/2.125 | 24X2X1-3/4 | 12X1.75/2.125 |
| 22x1.75 | 26x2x1 3/4 | 14X1.75/2.125 | 20X2X1-3/4 |
 |
| 24x1.75 | 27x1 3/8 |
 |
 |
 |
EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column
CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.kycarbon.com