Recently, Sinopec Group's ethylene plant of Maoming Petrochemical Company has successfully implemented the energy-saving project for direct benzene delivery of benzene produced by aromatics plants. This is another energy-saving measure after Maoming Ethylene's carbon 5 direct-delivery liquefied gas station produced by the hydrogenation unit is loaded and shipped.
All along, the electricity consumption of Maoming Ethylene remains high. For this reason, the factory did a lot of research and found that there are many unreasonable factors in the process of material transportation. Among them, the intermediate product tank is a more prominent cause of increasing energy consumption. Therefore, Maoming Ethylene boldly proposed to eliminate the management concept of intermediate product cans. Through the joint efforts of various offices and workshops, a practical plan has finally been put forward. In the solution, only a short connection to the inlet and outlet pipes of the benzene tank V-701A/B/C of the storage and transportation workshop can be directly delivered. There is no security risk and the plan was smoothly implemented after approval by the relevant authorities.
It is also understood that since July 2008, China Petroleum & Chemical Corporation has imposed production restrictions on major ethylene production facilities in order to ensure the plastic market price. Maoming Petrochemical's ethylene production is limited to around 80%, causing new and old devices to appear to be "not fully fed" and at low load. To this end, Maoming Ethylene quickly made a decision based on the market situation and decided to stop No. 1 butadiene equipment first, maximizing the load on No. 2 butadiene equipment to balance the intermediate product inventory and adjust the production of equipment in the chemical division. Structure, greatly reduce production costs to cope with unpredictable market trends. No. 1 and No. 2 hydrogenation units have the same problems. Maoming Ethylene's next work goal is to stop the No. 1 hydrogenation unit after lifting the production load of the No. 2 hydrogenation unit and effectively save energy and reduce consumption. jobs.
All along, the electricity consumption of Maoming Ethylene remains high. For this reason, the factory did a lot of research and found that there are many unreasonable factors in the process of material transportation. Among them, the intermediate product tank is a more prominent cause of increasing energy consumption. Therefore, Maoming Ethylene boldly proposed to eliminate the management concept of intermediate product cans. Through the joint efforts of various offices and workshops, a practical plan has finally been put forward. In the solution, only a short connection to the inlet and outlet pipes of the benzene tank V-701A/B/C of the storage and transportation workshop can be directly delivered. There is no security risk and the plan was smoothly implemented after approval by the relevant authorities.
It is also understood that since July 2008, China Petroleum & Chemical Corporation has imposed production restrictions on major ethylene production facilities in order to ensure the plastic market price. Maoming Petrochemical's ethylene production is limited to around 80%, causing new and old devices to appear to be "not fully fed" and at low load. To this end, Maoming Ethylene quickly made a decision based on the market situation and decided to stop No. 1 butadiene equipment first, maximizing the load on No. 2 butadiene equipment to balance the intermediate product inventory and adjust the production of equipment in the chemical division. Structure, greatly reduce production costs to cope with unpredictable market trends. No. 1 and No. 2 hydrogenation units have the same problems. Maoming Ethylene's next work goal is to stop the No. 1 hydrogenation unit after lifting the production load of the No. 2 hydrogenation unit and effectively save energy and reduce consumption. jobs.
Jiaxing Ganland Auto Parts Co., Ltd 's one of the main products is Aluminum Corner Edges . It contains Truck Door Aluminum Adge Corner Trim, Profile Rail, Corner Protector, Container Corner Fittings, Aluminum Corner Trim,Wrap Angle etc.
We have many big clients in domestic, like CIMC, DONGFENG etc. Also we have many clients overseas. For more information, you are warmly welcome to send us an email. We will feedback to you ASAP.
Truck Aluminum Corner Edge Series
Aluminum Profile Rail,Van Corner Protector,Cast Aluminum Wrap Angle,Container Corner Fittings,Aluminum Corner Trim
Jiaxing Ganland Auto Parts Co., Ltd. , http://www.gltruckparts.com