China Scrap Cable Wire Stripper Copper Wire Recycling Machine

                  Scrap Cable Wire Stripper Copper Wire recycling machine





Wire stripper machine, copper wire stripper is designed to strip various wire: Copper wire, single core wire, multicore wire, aluminum wire, sheet cble wire, flat wire, etc. After processed by a Scrap Cable Stripping Machine, metal like copper, aluminum or steel can be recovered
This machine is applicable to various types of wire, monofilament and filoselle cable.
It is a new wire stripping machine that widely used in the dissembling industry.

This machine has the following specifications:
Low power requirement.
Small dimensions.
Easy to move, place and install.
Easy and rapid maintenance.

Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.

If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.

                    Scrap Cable Wire Stripper Copper Wire recycling machine





Wire stripper machine, copper wire stripper is designed to strip various wire: Copper wire, single core wire, multicore wire, aluminum wire, sheet cble wire, flat wire, etc. After processed by a Scrap Cable Stripping Machine, metal like copper, aluminum or steel can be recovered
This machine is applicable to various types of wire, monofilament and filoselle cable.
It is a new wire stripping machine that widely used in the dissembling industry.

This machine has the following specifications:
Low power requirement.
Small dimensions.
Easy to move, place and install.
Easy and rapid maintenance.

Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.

If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.

 

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features

1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.

Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com