Eurona Drying Equipment Co., Ltd., based on the introduction of advanced technologies at home and abroad, has developed a new type of drying equipment, namely the SXG series fast rotary flash dryer, with advanced technology, reasonable design, compact structure, drying, smashing, and sieving. One-off completion, reducing processes, save energy, no environmental pollution, the overall performance of domestic and foreign advanced level.
The new device uses a variety of advanced devices, such as the use of a variety of feeding devices, so that feeding is continuous and stable, the filling process will not produce bridging phenomenon; the bottom of the dryer using a special cooling device, to avoid the material in the bottom high temperature area sticking and Deterioration phenomenon; The use of special air pressure sealing device and bearing cooling device, effectively extend the service life of the transmission part; The use of special air separation device, reducing the equipment resistance, and effectively provide the dryer processing air volume; Drying chamber is equipped with a rating ring And swirling pieces, can adjust the material fineness and final moisture; Using stirring and smashing device, produce a strong shearing, blowing and rotating effect on the material; Use air filter, cyclone separator, bag filter, etc. to effectively remove dust To avoid environmental and material pollution, etc. The device has strong mass transfer and heat transfer, high production intensity, short drying time and short material residence time. The device is widely used for drying food materials such as soybean protein, gelatinized starch, and wheat starch.
The main machine consists of a bed, a double-layer precision workbench, a sliding mechanism for adjusting the top seat, a sliding assembly for the top seat, a moving and driving system for the table, a rotating and driving system for the spindle, a rotating and adjusting mechanism for the parts, a matching balance, a cover frame, and an electrical numerical control part. CNC quenching transformer can be used to move up and down the lifting table at a constant speed, chuck or thimble fixed roll or shaft rotation at a constant speed, inductor water quenching while. The machine tool adopts advanced numerical control technology, through programming can realize continuous scanning quenching, quenching at the same time, section continuous scanning quenching, section quenching at the same time. The machine tool is driven by a stepper motor controlled by a programming controller, while controlling the heating equipment and workpiece rotation as well as liquid injection. The body is made of steel plate and channel steel structure, and the guide rail is made of cylindrical linear rolling guide. The workpiece moving drive screw is ball screw, and the top moving drive is T screw.
Main configuration of quenching machine host:
1. Numerical control system control;
2, stepper motor drive;
3, ball screw transmission;
4, cylindrical linear guide, ball slider sliding;
5. Ac speed regulating motor drives the sprocket chain, and the optical bar rotates the workpiece;
6, AC reducer motor drive lead screw, lead screw is the top lifting;
7, solenoid valve control water spray;
8, equipped with control heating equipment plug.
Main features of quenching machine host:
1, the use of numerical control technology, with connection, at the same time, segment connection, segment at the same time and other quenching functions.
2, used for shaft, disk, pin, gear and other parts of the induction quenching.
3, can be configured with integrated quenching liquid circulation cooling system.
4, the use of profile structure body, high degree of automation.
Notes for CNC quenching machine tools: CNC quenching machine tools are used to heat quench or normalize large workpieces with industrial electric frequency, low voltage and large current. Use should comply with the safety rules of electricity.
CNC,Quenching Machine,CNC Quenching Machine,CNC Machine
Ningbo Yufeng Electronics Co., Ltd , https://www.yufengheating.com