Introduction: NPM-510 is another new product introduced by TengCheng Technology for the power automation market. This product supports PROFIBUS-DP protocol, supports MODBUS protocol, supports FFT algorithm, can measure three-phase or single-phase AC parameters, and measures inverter output. Supports AI/AO/DI/DO signals.
Teng controlled NPM-510 was officially launched in the market in July 2012. It is a smart power meter that supports MODBUS protocol. Even more amazing is that it supports PROFIBUS-DP protocol at the same time. Accessible communication in the bus makes your power engineering easier and smarter.
Tengcontrol NPM-510 is a smart node for IoT cloud applications. It can easily implement remote monitoring, remote data synchronization push & pull, and remote diagnosis. At the same time, it can also accurately complete the voltage, current, active power, reactive power, apparent power, power factor, frequency, active power, and reactive power of each phase in a three-phase or single-phase AC loop. And dozens of electrical parameters, such as harmonic components, can be measured and the output signal of the inverter can be measured. Not only that, NPM-510 is also equipped with a standard digital communication interface, analog input / output interface and digital input / output interface, which can serve as the power system monitoring center, to achieve remote data telemetry, remote control, remote signaling, remote Tone.
Tengcontrol NPM-510 is an integrated body of high-brightness LED digital display of CPU digital signal processing chip. The specific performance parameters are as follows:
1. Three-table method accurately measures the three-phase AC voltage, current, active power, reactive power, frequency, power factor, harmonics, three items of electrical parameters, and can measure the output of the inverter.
2. Two-way communication interface: PROFIBUS DPV0 interface, RS485 interface, support MODBUS, expansion is easier, FFT algorithm, can calculate 1-15 harmonics
3. Can support IO input and output board customization, AI/AO/DI/DO and other signals
4. Digital display of various power parameters
5. Patch installation, no external bus, high reliability, strong anti-interference ability
6. Input voltage range 0-400V (0-100V can be customized)
7. Input current range 0-5A
8. Accuracy: 0.5% FS ± 2 words
9. Standard disk mount, dimensions: 96x96x110 (mm) hole size: 92x92 (mm)
10. Power supply: AC220V power supply, special custom (DC24V)
Teng controlled NPM-510 was officially launched in the market in July 2012. It is a smart power meter that supports MODBUS protocol. Even more amazing is that it supports PROFIBUS-DP protocol at the same time. Accessible communication in the bus makes your power engineering easier and smarter.
Tengcontrol NPM-510 is a smart node for IoT cloud applications. It can easily implement remote monitoring, remote data synchronization push & pull, and remote diagnosis. At the same time, it can also accurately complete the voltage, current, active power, reactive power, apparent power, power factor, frequency, active power, and reactive power of each phase in a three-phase or single-phase AC loop. And dozens of electrical parameters, such as harmonic components, can be measured and the output signal of the inverter can be measured. Not only that, NPM-510 is also equipped with a standard digital communication interface, analog input / output interface and digital input / output interface, which can serve as the power system monitoring center, to achieve remote data telemetry, remote control, remote signaling, remote Tone.
Tengcontrol NPM-510 is an integrated body of high-brightness LED digital display of CPU digital signal processing chip. The specific performance parameters are as follows:
1. Three-table method accurately measures the three-phase AC voltage, current, active power, reactive power, frequency, power factor, harmonics, three items of electrical parameters, and can measure the output of the inverter.
2. Two-way communication interface: PROFIBUS DPV0 interface, RS485 interface, support MODBUS, expansion is easier, FFT algorithm, can calculate 1-15 harmonics
3. Can support IO input and output board customization, AI/AO/DI/DO and other signals
4. Digital display of various power parameters
5. Patch installation, no external bus, high reliability, strong anti-interference ability
6. Input voltage range 0-400V (0-100V can be customized)
7. Input current range 0-5A
8. Accuracy: 0.5% FS ± 2 words
9. Standard disk mount, dimensions: 96x96x110 (mm) hole size: 92x92 (mm)
10. Power supply: AC220V power supply, special custom (DC24V)
Drill Bits,Metal Drill Bit,Diamond Drill Bit,Carbide Drill Bits
Gansu Lanzhou and Wuwei International Land Port Management and Operation Co.Ltd. , https://www.gslwyygs.com