Â
Our F40 models are perfect for aluminum fishing boats, bay boats, inflatable boats, pontoon boats and fishing boats. Â They are designed to satisfy the demand of leisure boaters with all kinds of boats. Â Parsun 40HP EFI outboard motors are powerful, reliable and easy to operate.
40HP EFI outboard features:
1.With reliable Delphi E.F.I. system and multifunction diagnostic scanner (scanner available at option), F40 is of high quality, long life and easily maintenance, whilst cutting your fuel and maintenance costs.
2.Through propeller hub exhaust and long leg provide a smooth quiet operation.
3.Long-term durability of critical engine components: water cooling fuel system, stainless steel water pump housing liner and camshaft-driven engine oil pump ensure the outstanding durability.
4.Several different sensors continually monitor the critical engine's major functions. Â They will send out special signals to inform you in advance, such as over-revving, overheating, or low oil pressure, and automatically reduce the engine power to prevent damage.
5.Large displacement and single overhead cam increase the low-end power with smooth and strong performance, and help the operator get excellent acceleration even when pushing a heavy load.
40HP EFI outboard benefits:
Fuel-water separator and fuel filter prevent any debris or water in the fuel from getting into the engine.
Built-in freshwater flushing system provides easy routine flushing.
High output 18 amp alternator for battery charging and fishing electronics.
Digital CD ignition system for quick start of the engine.
Power trim & tilt or hydraulic system makes engine operating more easily.
The thumbscrew mounting bracket reduces the time and effort needed to install or remove the outboard from a boat's transom.
Multi point electronic fuel injection with ECM control delivers the precise fuel / air mixture for optimum combustion and provides smooth running.
Warning & protection: low oil pressure warning, overheat warning, start-in-gear protection for safe engine starting, safety lanyard and over-revving limiter.
40HP EFI outboard specification:
| ITEM | F40BWL-T-EFI |
| Engine type | 4-stroke,3-cylinders, OHC |
| Displacement | 747 cc |
| Bore x Stroke mm(in.) | 65.0×75.0(2.56×2.95) |
| Max output Kw(HP)@ r/min | 29.4(40)@5000 |
| Fuel induction system | Electric Fuel Injection |
| Ignition system | Micro Computer |
| Starting system | Manual / Manual + Electric |
| Steering system | Tiller handle |
| Gear shift | Forward-Neutral-Reverse |
| Gear ratio | 2.0(26/13) |
| Trim and tilt system | Power trim & tilt |
| Max fuel consumption | 13.8 L/h |
| Fuel tank capacity | 24L |
| Sump oil capacity | 1.7 |
| Gear oil capacity | 430cc |
| Dry weight | 92.4kg~101.5kg |
| Alternator output | 12V 200W |
| Recommended transom height | 508mm (20 in.)Â |
Â
A heat exchanger is a device used to transfer heat, usually to transfer heat from one fluid to another without them mixing. A heat exchanger usually consists of a number of parallel pipes in which one fluid flows through the pipe and another fluid flows through the outside of the pipe. In this way, heat can be transferred from one fluid to another for heating or cooling purposes. Heat exchangers are widely used in many industries, such as chemical, pharmaceutical, food processing, air conditioning and heating systems, etc.
Heat exchanger usually consists of the following components:
1. Heat exchange pipe: Pipe used to transfer heat, usually made of metal materials, such as copper, stainless steel, etc.
2. Heat exchange surface: A surface used to transfer heat, usually consisting of metal sheets or pipes. The greater the surface area, the higher the heat transfer efficiency.
3. Housing: Housing, usually made of metal or plastic, used to secure heat exchange pipes and surfaces.
4. Seals: Seals used to prevent media leakage, usually made of rubber or silicone rubber.
5. Support: A support used to support a heat exchanger, usually made of steel or cast iron.
6. Import and export pipes: pipes used for medium entry and exit, usually made of metal or plastic.
7. Cleaning hole: A hole used to clean the inside of the heat exchanger, usually located on the upper or side of the heat exchanger.
8. Insulation layer: Insulation layer used to keep the temperature of the heat exchanger stable, usually made of glass wool or polyurethane foam.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Heat Exchanger,Tubular Heat Exchanger,Efficiency Tubular Heat Exchanger,Tube In Tube Heat Exchanger
Jiangsu Gelan Environmental Technology Co., LTD , https://www.glkj2010.com