Jacky, a Slovenian customer said in an e-mail: [Hello, I`d like to
purchase an S&A CW-5000 water chiller to cool hydraulic heat
exchanger (a requirement table was attached)"
Four requirements are written in the table: 1. the cooling capacity of
the water chiller shall reach 1KW at a room temperature of 30℃ and
outlet water temperature of 15℃; 2. the outlet water temperature of the
water chiller shall be in the range of 5℃~25℃; 3. the environment
temperature for the water chiller shall be in the range of 15℃~35℃; 4.
the voltage shall be 230V and frequency shall be 50Hz.
But, according to the analysis on the performance curve chart of S&A
CW-5000 water chiller, under the room temperature of 30℃ and outlet
water temperature of 20℃, the cooling capacity can only reach 590W,
which can`t meet Jacky`s cooling requirement; but for CW-5300 water
chiller with 1800W cooling capacity, its cooling capacity can reach
1561W under the same condition, which can meet Jacky`s cooling
requirement.
So, S&A recommended CW-5300 water chiller to Jacky to cool the
hydraulic heat exchanger. After S&A told the reason to Jacky, Jacky
directly placed an order to purchase the CW-5300 water chiller.
Thank you so much for your support and trust in S&A. All S&A
water chillers have passed the certification of ISO, CE, RoHS and REACH,
and the warranty period has been extended to 2 years. Our products are
worthy of your trust!
The technical parameter of CW-5000: http://Products/ChillerCW5000800Wcoo.html
The technical parameter of CW-5300: http://Products/ChillerCW53001800Wco.html
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Introduce the use and types of CNC lathe chuck
Introduces the definition of CNC lathe collet
CNC lathe chuck is made of bullet steel, the accuracy is guaranteed, the accuracy of tooling type can be guaranteed within 0.01-0,015, segmented heat treatment is adopted, which can prolong the service life of the chuck and has good wear resistance, advanced self-opening technology is adopted.
Introduces the use of CNC lathe collet for you
CNC lathe collet use: widely used in all kinds of CNC, instrumentation lathe, automatic lathe, etc.
Introduces the types of CNC lathe chuck
1.High precision spindle chuck for automatic lathe, back shaft chuck, guide bush, feeder material chuck.2.High precision spindle chuck, back shaft chuck, guide sleeve, feeder clamps for shaped parts such as bore quadrilateral, hexagonal, etc.
3.High precision spindle chuck with eccentric amount, back shaft chuck.
4.High-precision spindle chuck and back shaft chuck with elongated apex.
5.High-precision collets with non-standard drawings and samples.
6. (Collet) bore with round hole, quadrilateral, hexagonal, shaped, spring steel, carbide, and standard concentric, shaped eccentric (collet), etc.
7. Ordinary grade precision 0.005MM and high precision grade HP grade 0.003MM series.
Lathe Fixture,Lathe Chuck Fixture,Lathe Spindle Fixtures,Lathe Faceplate Fixture
Ningbo Yien Machinery Co., Ltd , https://www.nbyienmachinery.com