Use and Performance Specification for Flip - Flotted Plug Valves
Flip oil lubrication plug valve purposes
a, This product is mainly used for gas, liquid medium pipe to do hoist, connect or cut off the media flow, not suitable for regulating the media flow. With a small flow resistance, long life, opening and closing labor-saving advantages.
b, the scope of application: chemical, petroleum, metallurgy, papermaking, pharmaceutical and other industries.
Flip - flighted oil stopcock performance specifications
Flip oil lubrication plug valve precautions
1, the choice of valve materials and the possibility of deterioration in use, the necessary regular checks to be considered by the user.
2, The medium used in this valve is listed in the table of Article 1.2, the consequences caused by exceeding this range are entirely the responsibility of the user.
3, the valve surface may cause body contact scald during the work of the valve, the user must set the warning signs in the appropriate location.
4, the valve may not increase pressure or replace packing.
5, the valve in the process of running the welding repair and surface painting.
6, the valve under pressure can not be disassembled.
7, valve repair materials in accordance with the specific contract.
8, the valve design is not the life calculation, test and fatigue strength check, the user in the process of using regular maintenance and replacement.
9, the valve design did not consider the earthquake load.
Wood pellet complete production line is euipment for making the wood log/wood chips/sawdust/wood shaving/rice husk/stalk/grass...raw material into fuel pellets, Main process: Wood Chipper --hammer mill--biomass dryer--Biomass Pellet Machine--pellet cooler--Pellet Packing Machine.
Wood chipper: make the wood log/wood branches/wood blocks/bamboo... into smaller chips. Finished products: 20-50cm.
Hammer Mill/Crusher: crush the wood chips/wood shaving/small blocks/grass/stalk...to 6-8mm powder. Finished products: 6-8mm.
Rotary Dryer: dry raw material into suitable moisture to produce high-level pellets. Finished moisture: 10-15%
Wood Pellet Machine: press crushed and dry sawdust/rice husk/straw/grass... into pellets. Finished pellets: 6/8/10mm.(Asian Market standard: 8mm; European Market standard: 6mm)
Cooling Machine: cool high-temperature pellets before packing.
Reason: the finished pellets are very hot and realease moisture as they leave the pellet machine. This section can ensure to generate smooth pellets.
Packing Machine: pack pellets into 20-50kg/bag or 1 ton bag. Advantage: easily to be transported to final users' site.
Pellet Machine Line,Straw Hay Pellet Production Line,Straw Materials Pellet Production Line,Straw Pellet Production Line
Shandong Kingoro Machinery Co., Ltd , https://www.sdkingoromachinery.com