Futian Auman Gas Compression Garbage Truck

Vehicle name:

rubbish truck

Vehicle category:

VIP Car

Vehicle model:

BJ5163EJFCD-XA

Chinese brand:

Auman

Manufacturer:

Beijing Futian Daimler Automotive Co., Ltd.

engine model:

Phaser180TiN-40

Engine power:

134

engine capacity:

5990

Engine manufacturer:

Tianjin Lovol Power Co., Ltd.

Overall dimensions ( length / width / height ) :

8665 × 2482 × 3080

Cargo bed ( length / width / height ) :

× ×

Total mass (Kg) :

16000

Fuel type:

CNG

Curb weight (kg) :

11080

Rated mass (kg) :

4725

Approach angle / departure angle:

22/15

Front / rear suspension:

1365/2800

Wheelbase (mm) :

4500

Axle load:

6000/10000

Number of tires:

6

Tire specifications:

10.00-20

Front track:

1883

Rear track:

1847

Chassis configuration:

Futian Auman ETX high-end cab, Datong 6- speed gearbox, 10 tons rear axle, with original air conditioning, equipped with 640L fuel tanks. The engine is a 182- horsepower, day-to-day fuel and gas engine, and the national 4 emission standard.

Dedicated configuration:

1. The volume of the car body is approximately 14 cubic meters. The car body is made of 5mm GB carbon steel sheet and consists of a hydraulic mechanism composed of a charging mechanism, a compression mechanism, a unloading mechanism, an oil pump, an oil tank, and a control valve. The loading mechanism is composed of a bracket, a connecting rod mechanism, a cam, a hook, etc. Under the action of the oil cylinder, the garbage in the trash can is automatically inverted and poured into the hopper.

2. The entire vehicle adopts electromechanical and hydraulic integration technology, and uses a machine, electricity, and hydraulic linkage control system to realize the dumping, crushing, and flattening of garbage by means of fillers, push shovels, etc., and pushes garbage into the cabin and presses it. Real and evasive. Sewage collection box at the bottom of the filler, the sewage in the trunk can flow into it, and can be discharged through the ball valve when the trash is unloaded.

3. Imported parts are used for key components, which have the advantages of high pressure, good sealing, convenient operation and safety. The loading cycle is a one-stroke operation of the imported PLC . The hydraulic control operating system is an electric control and a manual control. The manual control is to prevent the electronic control from malfunctioning even when it is malfunctioning.