The wind power industry in China is under development. The investigation of wind energy resources is a task that must be done to establish wind farms. In order to make a correct assessment of the wind energy resources at the site where the wind farm is to be established, it is necessary to install wind instruments at some points and record the data. The wind direction wind speed recorder can record the wind direction wind speed data collected by the wind direction wind speed sensor. In the automatic mode, the interval time must be set first. The instrument can automatically record the data according to the set interval time.
ZDR-1F model wind direction wind speed recorder is also called wind direction wind speed self-recording instrument. The use steps are:
1. Use the supplied communication cable to connect the recorder to the serial port of a general computer (PC586 or higher).
2. Run the recorder application program on the computer to set parameters such as recording start time, recording period, stop time, and stop mode of the recorder.
3. After the setting is completed, disconnect the recorder from the computer (or not work offline, real-time display on the computer), and place the recorder on the occasion to be detected.
4. After completion, connect the recorder to the computer and run the recorder application program to download the recorded data to the computer for data processing.
5. For detailed instructions, please refer to the instruction manual or contact online directly.
When using the ZDR-1F wind direction recorder, it is important to note that the wind direction recorder is a more sophisticated instrument to prevent collision vibration and should not be used in places with excessive dust or corrosiveness. After the instrument is repaired, it must be recalibrated.
O Ring Seals ,Rubber O Rings,Sealing Ring,O Ring Gasket
Ningbo Robon Sealing CO.,LTD , https://www.zjrboorb.com