Dry or Wet Type Quartz Magnetic Separator

Dry Or Wet Type Quartz Magnetic Separator :

 1.Brief introduction of magnetic separator

Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. We can provide magnetic separators of forward flow, semi counter flow and counter flow types according to customers' request.

2.Working principle of magnetic separator

Slurry enters chute through ore tank firstly, and then separating zone by waterpower. Mineral with strong magnetism is absorbed on the barrel surface, sent to concentrate discharging zone and discharged into concentrate box by water effectGangue and ore with weak magnetism are discharged into a pipe in opposite direction of barrel.

3.Features of magnetic separator
1). High magnetic intensity.
2). Low energy consumption.
3). Good beneficiating efficiency.
4). Simple structure and easy maintenance.

We have various of Magnetic separator, such as CTB612, CTB618, CTB718, CTB918, CTB1018, CTB1024, CTB1224, etc.

4.Parameter of magnetic separator

Contact:
Ms Sara Pang
Mobile phone :: 0086137 8347 1727
 
 
  Dry Or Wet Type Quartz Magnetic Separator :

 1.Brief introduction of magnetic separator

Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. We can provide magnetic separators of forward flow, semi counter flow and counter flow types according to customers' request.

2.Working principle of magnetic separator

Slurry enters chute through ore tank firstly, and then separating zone by waterpower. Mineral with strong magnetism is absorbed on the barrel surface, sent to concentrate discharging zone and discharged into concentrate box by water effectGangue and ore with weak magnetism are discharged into a pipe in opposite direction of barrel.

3.Features of magnetic separator
1). High magnetic intensity.
2). Low energy consumption.
3). Good beneficiating efficiency.
4). Simple structure and easy maintenance.

We have various of Magnetic separator, such as CTB612, CTB618, CTB718, CTB918, CTB1018, CTB1024, CTB1224, etc.

4.Parameter of magnetic separator

Contact:
Ms Sara Pang
Mobile phone :: 0086137 8347 1727
 
 
 

our dished heads are used in a variety of applications and industries such as storage tanks, pressure vessels, road tank, food processing operations, chemical plants ,Nuclear operation, Oil Refining, Architectural feature, power generation.

Due to our forming experience and equipment, we can spin or press the first part of the process of forming your products, It depend on the thickness and material performance,

Our main products are 2:1 SE dished heads, Torispherical heads, Cones,Hemispherical heads etc

Choosing the right type is the key decision for each customer and one for which our experience team to happy to give advice, simple speaking, the torispherical heads, the less ressure it can withstand, Conversely, the deeper dished heads, for example Elliptical heads, hemispherical, the greater pressure it can take.

Our in house-capability to form dished heads by cold press brings major benefits to our customers and sets us apart from others dished heads manufactures

For carbon steel dished heads, we can forming this dished heads from 76-9000mm in diameter and below 250mm in thickness  

The general forming process as the below sketches

Technical Delivery Condition
1,Our material (hot Rolled Unalloyed structural steel, high and low temperature steel, High Alloy steel)
We have no carbon steel plates in our stock and most of plates are from Chinese steel market or mill. Meanwhile As Japanese owed company, We can also source the plates from Japanese ex-mill if end user can`t accept ex-chinese mill.
Basically the delivery time shall be below 20days for dished heads if plates are from steel market. and Max plates width from them is below 2200mm. it means that the seamless dished heads diameter shall be below about 1800mm.
The max width CS plates that Chinese mill can do is below 4700mm,and dished heads can be seamless below 3800mm in diameter.

2,Enquiry/order required information

We can give our clients once they gave us the below information

But if clients tolerance is higher than below Hokkai standards, it shall be provided to Hokkai prior to offer or ordering.

Clad Material Elliptical Head

Clad Material Elliptical Head,Clad SS Material Elliptical Head,Clad Plate Elliptical Head,Quality Clad Material Elliptical Head

YIXING HOKKAI HEAD PLATE CO.,LTD , http://www.hokkaidishedend.com