Eccentric Hydraulic Control Butterfly Type Check Valve BCT-E-HCV-1

Eccentric Hydraulic control butterfly type check valve BCT-E-HCV-1

 Specifications

1. Size and pressure range:

Size: DN100-DN4000

Pressure: PN6-PN40

2. Medium and temp. range:

Suitable medium: water and low-corrosive liquid etc.

Suitable temp.: -10-120

3. Technical items:

Design standard: EN593

Face to face length acc.to:ISO5752 series14/DIN3202,F4

Flange dimensions and drilling acc.to: ISO7005-2/ EN1092-2, DIN2501

Top works acc.to: ISO5211

Top flange for actuator installation acc.to: ISO5210

4. Material items:

Body: ductile iron,

Disc: ductile iron

Shaft: SS420

Body seal ring:SS304

Disc seat ring: EPDM/NBR/VITON

Retainer ring: SS304

Shaft bush: AL-bronze

notes: Other materials are available on request

1. Product catalogue:



2.BCT Customers





 

4.Inspection and test


 

 

 

Eccentric Hydraulic control butterfly type check valve BCT-E-HCV-1

 Specifications

1. Size and pressure range:

Size: DN100-DN4000

Pressure: PN6-PN40

2. Medium and temp. range:

Suitable medium: water and low-corrosive liquid etc.

Suitable temp.: -10-120

3. Technical items:

Design standard: EN593

Face to face length acc.to:ISO5752 series14/DIN3202,F4

Flange dimensions and drilling acc.to: ISO7005-2/ EN1092-2, DIN2501

Top works acc.to: ISO5211

Top flange for actuator installation acc.to: ISO5210

4. Material items:

Body: ductile iron,

Disc: ductile iron

Shaft: SS420

Body seal ring:SS304

Disc seat ring: EPDM/NBR/VITON

Retainer ring: SS304

Shaft bush: AL-bronze

notes: Other materials are available on request

1. Product catalogue:



2.BCT Customers





 

4.Inspection and test


 

 

 

High Efficiency Spirotal Heat Exchanger

The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer.
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger`s helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger`s Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger`s Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spiral plate heat exchanger is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series

High Temperature Spiral Plate Heat Exchanger,Spirotal Heat Exchanger Equipment,Spiral Board Plate Heat Exchanger,Carbon Steel Spiral Plate Heat Exchanger

Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com