October 26, 2011 Reporter was informed that Honeywell recently announced its third-quarter sales of 9.3 billion US dollars, an increase of 14% over the same period of 2010 sales (8.1 billion US dollars); third-quarter earnings per share 1.10 The U.S. dollar was up 45% from the same period in 2010 (US$0.76 per share); the free cash flow in the third quarter was US$884 million.
Honeywell previously expected third-quarter 2011 revenue of between 91 and 94 billion US dollars, an increase of 12-15%; earnings per share between 0.96-1.01 US dollars. Revenue for the full year 2011 was between US$361-367 billion, an increase of 12-14% over 2010; EPS was US$3.84-4.00, an increase of 28-33% over 2010; free cash flow remained at 3.5-3.7 billion Dollars. Given the increase in sales in the third quarter, Honeywell raised its sales target for the entire year of 2011 from $36.5 billion to $36.7 billion, an increase of 13% over the same period of 2010; earnings per share of $4.00 to $4.05, compared with 2010 Year-on-year growth of 33-35%; free cash flow close to 3.5 billion US dollars.
Honeywell is a diversified high-tech and manufacturing company with operations in aerospace products and services, building, home and industrial control technologies, automotive products, turbochargers, and specialty materials. The company is headquartered in Morristown, New Jersey, and currently employs approximately 120,000 people.
Welded Bed Plate For Flanges Of Ship Pipe
The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes.
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.
Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com