| PS-126Â SELF-SUCKINGÂ PUMP |
| BRIEFÂ INTRODUCTION |
| With a small tank over its impeller, PS series pumps are a good solution for self-priming. |
| And also it is with peripheral impeller and gains high pressures relative and its curves are steep particularly. |
| The wide range of PS series is particularly suitable for domestic applications and the automatic distribution of water from surge tanks, |
| watering gardens and for boosting insufficient mains water pressure, reliable, economic and simple to use. |
| These pumps should be installed in a covered area, protected against the weather. |
| And also it is with peripheral impeller and gains high pressures relative and its curves are steep particularly. |
APPLICATION
- 1. The pump have a compact size and simple to use.
- 2. Heavy duty continuous work.
- 3. Ambient temperature up to 40ºC.
- 4. The thermal protector is installed if required.
- 5. The shaft is 45# steel or stainless steel and not easy to rust.
- 6. 220-240V 50HZ power which is safer for your using.
- 7. The stator is 100% copper wire with high quality.
OPERATINGÂ CONDITION
- 1. Liquid temperature up to 60
- 2. Ambient temper up to 40
- 3. Total suction lift to 9m
- 4. Continuous duty
CONSTRUCT
Pump
- Pump body: Cast Iron
- Impeller: Brass   Â
- Mechanical seal: Carbon/ceramic/Stainless Steel Â
Motor
- Single Phase
- Heavy Duty Continuous Work
- Motor Housing: AluminumÂ
- Shaft: Carbon Steel/ Stainless steel  Â
- Insulation class: B and F   Â
- Protection class: IP44 or IP54 Â
- Cooling:Externally ventilation
| MATERIALÂ ANDÂ WORKINGÂ LIMITS |
| Pump body: Cast iron |
| Impeller:Â Brass |
| Motor Housing: Steel |
| Mechanical seal: Stainless steel (graphite to ceramic) |
| Shaft: 45#steel or stainless iron |
| Bearing:Â SKF/NTN/NSK/CHINA |
| Insulation: B and F |
| Protection class: IP44 and IP54 |
TECHNICALÂ DATA(220-240V/50HZ)
| Model | Power |  | Q.max. | H.max. | Suct.max. | Speed | Pump dia. | PACKAGE DIMENSIONS & GW | |||
| Â | HP | KW | L/min | m | m | r.p.m | Inlet/Outlet | A | B | H | Kg |
| PS-126 | 0.33 | 0.25 | 35 | 28 | 9 | 2850 | 1"*1" | 170 | 280 | 195 | 7.5 |
| AUPS-126 | 0.33 | 0.25 | 35 | 28 | 1"*1" | 230 | 310 | 290 | 9 | ||
| MQS-126 | 0.5 | 0.37 | 35 | 33 | 1"*1" | 180 | 245 | 250 | 8.5 | ||
Â
Solar Pv Bracket Roll Forming Machine is used galvanized or PPGI as raw materials, it has light weight, hight duty, easy to operate advantages.
And it had great flexibility for commercial and residential rooftop solar systems.
It applies common with solar panels mounted on the frame parallel inclined roof.
Specifications:
Matching material
Galvanized, PPGI, Aluminum
Material thickness range
1.5-2.5mm
Feeding width
300mm(can change according to buyer's request)
Roller
15-21 rollers
Material of roller
45# steel with chromed
Main motor power
22KW
Forming speed
8-15m/min
Shaft material and diameter
80mm, 45# steel with chromed
Way of driven
Chain transmission or gear box
Material of blade
Cr12 mould steel with quenched treatment 58-62℃
Voltage
380V/3Phase/50Hz
Controlling system
PLC
Working process:
Decoiler - Feeding and leveling machine - Punch press - Main roll forming machine - PLC control - Hydraulic cutting - Collection table
Pictures for machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Solar PV Bracket Roll Forming Machine
Solar Pv Bracket Roll Forming Machine,Solar Pv Roof Brackets Roll Forming Machine,Solar Pv Panel Mounting Brackets Roll ,Stainless Angle Bracket Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn