How to operate and maintain the circulating water vacuum pump?

The circulating water vacuum pump, also called water ring vacuum pump, is a crude vacuum pump. The ultimate vacuum it can obtain is 2000-4000 Pa, and the serial atmospheric ejector can reach 270-670 Pa. Water ring pumps can also be used as compressors, known as water ring compressors, which are low pressure compressors with a pressure range of 1-2X105 pascals gauge pressure.
Correct use method:
Open the lid of the tank and inject clean cold water. The height of the water level is limited to just below the overflow nozzle.
Turn on the power plug, turn on the start switch, and the pump starts to work.
Blocking the mouthpiece with your finger, the corresponding vacuum gauge can reach -0.1Mpa vacuum indicating that the pump is working properly.
Each nozzle of this machine has a one-way check valve. For the sake of safety, more effective measures should be taken to prevent the pump from stopping. The water in the pump will flow back into the pumped container. The specific methods are: (1) Cut off the tube between the vacuum pump and the pumped container. (2) Stopping the work is about to be pumped out of the container.
The ultimate vacuum of the circulating water vacuum pump is limited by the saturation vapor pressure of the water. For long periods of operation, an increase in water temperature will affect the degree of vacuum. In this case, connect the water outlet (lower mouth) at the back of the device to tap water. Spill outlet (upper mouth) drainage. Appropriate control of flow can keep the water temperature in the tank from rising, and the vacuum level is stable.
Correct maintenance method:
Maintaining clean water frequently is the key to long-term stable operation of equipment. Change the water and clean the water tank regularly. Do not smoke dust and solid matter.
Some corrosive gases can lead to deterioration of the water quality in the tank, resulting in bubbles, affect the degree of vacuum, it should pay attention to continuously change the water.
For particularly strong corrosive gases, it should be carefully judged whether there is a reaction with the materials used in this equipment and be used with caution.

If the vacuum does not go up, it is firstly judged whether the pumped container is leaking or the pipe is loosened. In the case of a pump problem, check the inlet or air lines for blockage or loosening of the leak.

In addition, if the circulating water pump's motor does not turn, check the power supply or fuse.

Other Aluminium Extrusion Products

Aluminium ceiling extrusion is a process of manufacturing aluminium ceiling panels by extruding them through a die. Extrusion is a process in which a material is forced through a die to create a specific shape or profile. In the case of aluminium ceiling extrusion, the aluminium is heated and then pushed through a die to create a panel with a specific shape and size.

The extruded aluminium ceiling panels are lightweight, durable, and easy to install. They can be used in a variety of applications, including commercial and residential buildings, hospitals, schools, and other public spaces. Aluminium ceiling panels are also available in a range of finishes, including powder-coated, anodized, and painted.

Aluminium ceiling extrusion is an efficient and cost-effective way to manufacture high-quality ceiling panels. The process can be automated, which reduces labor costs and increases production efficiency. Additionally, aluminium is a recyclable material, which makes it an environmentally friendly choice for ceiling panels.

Other Industrial Aluminium Extrusions,High Precision Aluminum Extrusion,Reusable Modular Aluminum Extrusion,Aluminum Profile For Led Strip Lighting

Foshan Modern Copper & Aluminum Extrusion Co.,Ltd. , https://www.fscncaluminium.com